|
|
|
|
|
|
|
|
|
|
|
|
| Nitrogen Gas Generators |
 |
 |
 |
 |
| KT-SERIES |
KT-MII SERIES |
NT SERIES |
MNT SERIES |
|
|
|
|
| Nitrogen gas generator MNT SERIES |
 |
The adsorbent used for the equipment has characteristics to selectively adsorb a large amount of oxygen in the initial stage of adsorption and to adsorb a larger amount in the high-pressure condition. Therefore, it can adsorb the oxygen gas, carbon dioxide gas, and moisture in a short time from the air introduced into an adsorption vessel and can obtain high-purity nitrogen gas as product gas from the top of the adsorption vessel. On the other hand, the adsorbent which has adsorbed oxygen gases can be easily removed/and regenerated by reducing the pressure to atomospheric pressure. Therefore, high-purity nitrogen gas can be produced continuously by alternately pressurization and desorption in two adsorption vessels.
|
|
|
 Easy handling because of all automatic operation
Compact design requiring small space
Installed anywhere if power is supplied.
High-purity and dry (?55¡ÆC or less) nitrogen gas can be obtained.
Pressure vessels are made from aluminium.
Used in a room without anxiety because of quiet operation sounds
Only pressing button enables gas to be supplied after several minutes.
Product gas purity 99.999% is available. |
|
 |
|
|
|
|
Substitution for cylinder
Carrier gases for various analysis instruments or scientific instruments, and purge gases used in a laboratory
For heat treatment
Blanket gases for metal heat treatment, purge gases, blanket gases for ceramics and ferrite burning, oxidization-protection gases when in welding and soldering
For semi-conductor industries
CA storage gases for fruits and vegetables
Non-oxidization seal gases foods
Filling-up gases for medicine packing, carrier gases for welding, reduction of oxygen scavenger
Explosion-proof or rust-prevention gases
Purge gases for tank, reaction vessel, piping, seal gases for flammable materials, rust-prevention gases for communication cables and various tanks
Seal gases for shipping
Blanket gases for synthetic fibers and melted spinning |
|
|
|
| 99% (N2+Ar) model |
| Type |
Product gas(NL/MIN) |
Discharge pressure (MPa) |
Dimensions (mm)
W ¡¿ D ¡¿ H |
Weight (kg) |
Power supply |
| M2NT-10 |
10 |
0.3 |
450 ¡¿ 655 ¡¿ 750 |
75 |
100V 500W 50/60Hz |
| M2NT-20 |
20 |
" |
450 ¡¿ 655 ¡¿ 1000 |
120 |
100V 1.2KW 50/60Hz |
| |
| 99.9% (N2+Ar) model |
| Type |
Product gas(NL/MIN) |
Discharge pressure (MPa) |
Dimensions (mm)
W x D x H |
Weight (kg) |
Power supply |
| M3NT-5 |
5 |
0.3 |
450 ¡¿ 655 ¡¿ 750 |
75 |
100V 500W 50/60Hz |
| M3NT-10 |
10 |
0.3 |
450 ¡¿ 655 ¡¿ 1000 |
120 |
100V1.2KW 50/60Hz |
| |
| 99.99% (N2+Ar) model |
| Type |
Product gas(NL/MIN) |
Discharge pressure (MPa) |
Dimensions (mm)
W ¡¿ D ¡¿ H |
Weight (kg) |
Power supply |
| M4NT-2.5 |
2.5 |
0.3 |
450 ¡¿ 655 ¡¿ 750 |
75 |
100V 500W 50/60Hz |
| M4NT-5 |
5 |
0.3 |
450 ¡¿ 655 ¡¿ 1000 |
120 |
100V 1.2KW 50/60Hz |
|
|
|
|
|
 |
|
|
